Cooler Master RC-1010 Manuale di Installazione Pagina 46
- Pagina / 60
- Indice
- RISOLUZIONE PROBLEMI
- SEGNALIBRI
Valutato. / 5. Basato su recensioni clienti
Trouble shooting 21
Forecast of Cause:
Check Point 3 : Check Electrical Components
OKOK
OKOK
YESYES
OK
NO
Check Point 1 : Check Installation Condition
Outdoor Unit - No Power
1. Power Supply failure 2. External cause
3. Electrical Components defective
Isn’t the breaker down?
Check loose or removed connection cable.
>>If abnormal condition is found, correct it by referring
to Installation Manual or Data & Technical Manual.
Check Point 2 : Check external cause at Indoor and Outdoor (Voltage drop or Noise)
Instant drop ----- Check if there is a large load electric apparatus in the same circuit.
Momentary power failure ----- Check if there is a defective contact or leak current in the power supply circuit.
Noise ----- Check if there is any equipment causing harmonic wave near electric line.
(Neon bulb or electric equipment that may cause harmonic wave)
Check the complete insulation of grounding.
Check the voltage of power supply.
>> Check if AC187 - 253V appears at Outdoor Unit Terminal L1 - L2.
Check Fuse in Main PCB.
>> If Fuse is open, check if the wiring between Terminal and Main PCB is loose,
and replace Fuse.
Check Varistor in Main PCB.
>> If Varistor is defective, there is a possibility of an abnormal power supply.
Check the correct power supply and replace Varistor.
Upon checking the normal power supply, replace Varistor.
If the symptom does not change by above Check 3, replace Main PCB.
02-25
- INSTRUCTION 1
- CONTENTS 2
- 1-1 COOLING CAPACITY CONTROL 4
- 2-1 HEATING CAPACITY CONTROL 5
- 3-1 INDOOR UNIT CONTROL 5
- 4. AUTO CHANGEOVER OPERATION 6
- 5. INDOOR FAN CONTROL 7
- 5. HEATING OPERATION 8
- 6. OUTDOOR FAN CONTROL 9
- 7. LOUVER CONTROL 10
- 8. COMPRESSOR CONTROL 11
- 9. TIMER OPEARTION CONTROL 12
- 11. TEST OPERATION CONTROL 14
- 14. AUTO RESTART 14
- MINIMUM HEAT OPERATION 15
- ECONOMY OPERATION 15
- 20. DEFROST OPERATION CONTROL 16
- 3. Defrost Flow Chart 17
- Over 60.8°F (16°C) or 18
- 22. VARIOUS PROTECTIONS 19
- WALL MOUNTED type 21
- 2. TROUBLESHOOTING 22
- 2-1-2 OUTDOOR UNIT DISPLAY 23
- 2-1-3 INDOOR UNIT DISPLAY 24
- INDOOR UNIT 29
- Check Point 2 : 31
- Check Point 3 : 37
- Indoor Unit - No Power 45
- Outdoor Unit - No Power 46
- No Cooling / No Heating 48
- Abnormal Noise 49
- Water Leaking 49
- 2-4 SERVICE PARTS INFORMATION 50
- Inverter Compressor 51
- Outdoor unit fan motor 53
- Indoor unit fan motor 53
- 3-1-1 INDOOR UNIT 55
- Function Number 57
- Setting Value 57
- Thermistor Resistance Values 59
- 3-2-1 INDOOR UNIT 59
- 3-2-2 OUTDOOR UNIT 59
- Sep. 2010 Printed in Japan 60
Hinkley-lighting ASHLEY 5194 podręczniki
Instrukcje obsługi i podręczniki użytkownika dla Oświetlenie Hinkley-lighting ASHLEY 5194.
Dostarczamy 1 pdf podręczników Hinkley-lighting ASHLEY 5194 do pobrania za darmo według typów dokumentów: Instrukcja Użytkownika
Commenti su questo manuale